If you have a fire or water emergency, please call us now at (410) 679-6260

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Tips on Mold Control

8/31/2017 (Permalink)

Tips on Mold Control

Mold in homes is a common problem facing the society in the past years. Though the problem might have cooled down, mold in homes are still an important issue. Nonetheless, what are molds? They are a part of the natural environment and can be found anywhere, whether indoors or outdoors. Normally, mold in homes are not a problem unless mold growth behind wall occurs indoors.

The effective method in controlling mold damage especially black mold is to control moisture content or seeking restoration company services. There are two important things to note about mold removal; first, you have to do the right thing the first time and whenever you face mold in homes, eliminate them immediately. Ensuring you follow the right steps in mold removal will take care of the later problems. Below are steps that can be adopted in mitigation process of black molds.

#1 Step one: Learn about moisture control

Since the only efficient method in mold preventing mold growth behind wall is through moisture control, it is important to learn about moisture and mildew control. Fungus can be an invisible intruder that is capable of growing in the corners of your house. Additionally, you also experience mold growth behind wall without your knowledge. Such behavior requires a quick inquisitive thinking in dealing with them.

The first step is to understand what is behind its growth. Second, become an expert in dealing with moisture control and the mitigation process. Something to note is that, when water leaks or spills occur in your home it is likely commercial mold damage will occur and therefore mold removal will be required.

#2 Step two: mold assessment

It is critical to assess the possibilities of commercial mold damage and begin the cleanup process. Checking every nook and cranny where mold growth can hide is necessary. In addition, the added knowledge of what these fungus feed on is also necessary. Black mold feeds on cellulose as well as moisture and is commonly found on dry rot and framing materials.

#3 Step three: mold cleanup

It is always necessary to eliminate fungus in homes as quickly as possible. Deodorization depends on a number of factors. One consideration is the size of mold damage, for instance if the area of infestation is less than 10 square feet, in most cases it is possible to handle the mold removal process by yourself before seeking services of a restoration company. However, you might need some tips and techniques before undertaking the task. Below are several tips in remediation of commercial mold damage and mildews:

• First step in remediation is to fix plumbing leaks and any other water leaks sources as soon as possible. Additionally, a dry rot is also an important procedure in prevention of commercial mold damage.
• Scrub hard surfaces infested with fungus with detergent and soap thoroughly, using a dry rot and deodorization is equally necessary to remove any smelly odor.
• Throw away absorbent materials such as ceiling tiles and carpets. Mold growth and mildews are likely to fill the empty spaces and crevices creating a smelly odor and therefore making them almost impossible to remove. However, deodorization can also be used.
• It is also important not to paint or caulk moldy surfaces. Instead, clean up the mold damage and dry rot the surfaces before painting. Paint applied on black mold surfaces is likely to peel off or wear out quickly.
• Seek the help of a restoration company. Services of a restoration company are necessary in perfect attainment of the mitigation process.

#4 Step four: determine if the cleanup has been successful

Just because mold growth and mildew is gone and there are no signs of dirt or dust does not mean you are done. Making a judgment call requires some options and guidelines. Some of these guidelines include:
• Verify if the moisture problem has been fixed by revisiting after remediation, if it has worked you shouldn’t find any signs of damage.
• Remediation process might have worked if there are no signs of visible mold growth or smelly odor
• Homeowners should be capable of re-occupying their homes if there are no physical or aggravated health complains. Additionally, if there is no smelly odor of mold growth behind wall it might be safe.

Mold damage mitigation is achieved using the above process more so on the moisture control process. Additionally, deodorization can also slow down mold growth behind wall.
Visit http://www.SERVPROeastharfordcounty.com for more information on mold.

Other News

View Recent Posts